Electric Tankless Water Heater Not Hot Enough For A Bath?
i can’t get the bath water temp hot enough to fill my tub, and in the shower it gets hot, then too hot, then goes to frezzing cold, then back to hot again ?
Related posts:
- Imagine That Your Water Heater Has Broken, But You Want To Take A Bath. You Fill Your Bathtub With 25 Kg Of Ro?
- Imagine That Your Water Heater Has Broken, But You Want To Take A Bath. You Fill Your Bathtub With 25kg Of R..
- Need A Electric Water Heater Sufficiant To Fill A Bath?
- I Live In An Apartment With A Very Poor Water System: Is It Normal To Have A Limit On How Deep The Bath Can Be
- My Tankless Water Heater (paloma) Makes A Rumbling Noise When The Shower Is Set To “warm”?
January 28, 2010 @ 5:23 pm
Have the unit checked out it’s either defective or old, that shouldn’t happen.
January 28, 2010 @ 9:44 pm
I have had this problem…the central core of the heater doesn’t have enough water in it to heat the water as it flows through. You need to refill it. The outlet should be at the top of the heater, place some plastic tubing over it and slowly, using a funnel pour water in.
January 28, 2010 @ 9:51 pm
low capacity or recovery
January 29, 2010 @ 12:07 am
turn the shower on to fill the tub
RSS feed for comments on this post. TrackBack URL
Leave a comment