Home » Water Systems Q & A » Water Softener And Garden Planning?

If you are using the tap on the …

Comment posted Water Softener And Garden Planning? by Sulli.

If you are using the tap on the outside of your house then it doesn’t or shouldn’t go through your water softener so you don’t have any worries.
Try to buy plants that are drought hardy and you won’t have to water so often. You can get some fantastic plants in that range.
Be water wise and you may save yourself some work, money and the environment as well.
Happy gardening

Sulli also commented

  • Hope ou aren’t planning on watering with softened water. I can’t believe that watering with salted water would be good for your plants. If you are talking about an outside source of water that doesn’t go through the softener, it won’t effect how much salt you put in your softener.
  • You don’t want to use salt in your softener if it provides water to your sprinkler system. I plumbed my sprinkler system in before the softener to avoid this problem. If it is tapped in after the softener you will probably want to use potassium chloride instead of salt in your softener. And since more water goes through your softener, you will see your salt (or potassium chloride) go down quicker.

Recent comments by Sulli

  • Water Heater Issues……..can U Help?
    My first question is, what type heater do you have, gas or electric? Is this the first time you have ever drained the tank? What type of pipes are in your house? Do you have a filter upstream of the heater? Calcium is a byproduct of heating water. The minerals in water settle at the bottom, and should be drained out about 4 times a year. Whether you have gas, electric, tank or tankless, calcium is still a problem. If you are considering a switch from a tank type heater, to a tankless unit, make sure you read, and UNDERSTAND ALL THE MANUFACTURERS RECOMENDATIONS, because if you don’t comply with their instructions, you can possibly do some serious damage to the heater, and your house. The gas models especially need to be installed exactly as the manufacturer says, or damage to the unit, or even a fire can be caused, due to the increased amount of gas required, and the flue pipe needing to be replaced. It isn’t just a simple swap out, as some people think. I have removed more units than I have installed, because after researching the problem, all the units I removed, had been installed, without regard for the manufacturers recommendations. Most of the time it is an undersized gasline, but sometimes the flue pipe was not changed out, and after pricing the suggested flue pipe, the customers went back to a tank model. If you are thinking of this option, call a professional, and make sure he has done this type of installation, before letting him or her do the job. Good luck to you!
  • Water Heater Issues……..can U Help?
    If it’s clogged with sediment then maybe most of your tank is and it’s just eating the electricity to keep the sediment hot get a new water heater
  • Water Heater Issues……..can U Help?
    Based on the description of the problem and if the unit itself is older I would consider a replacement. If you look at all the sludge in the bottom that is accumulated you must keep in mind that stuff is coming out in your water when you shower, wash bathe etc. Also they are find now that in tank models bacteria such as Legionaires Disease and others can thrive in a dirty tank that sits for long periods. Not Good!
    I have a tankless water heater in my home and it is the best thing ever. It provides endless hot water so you can shower all day if you want and it never runs out. My electric bill went down about 35 dollars a month also as it only turns on when you activate hot water. A tank model turns off and on all day even if you don’t use it. The water is also safer as I indicated as it is not stored and heats as you need it.
    I did a lot of research and the largest selling unit and one that I use is the Titan Tankless N-120 Water Heater. They invented it and have been in business 20 years.
    All of the information on the unit and helpful things to help you decide are on their site at http://www.titantankless.com
    Please be careful about gas models as they are DANGEROUS!
    I would stick with electric.
  • Water Heater Issues……..can U Help?
    Replace the hot water heater, it’s done. There’s 3 to 4 inches
    built up on the burner plate, if you did clean it off the steel has been sacrificed.
    So how’s your harvick 29 car doing, yea mark martin is washed, NOT.
  • Replacing Element In Electric Water Heater.?
    BUT is the wire feeding the htr lg enuf to handle the larger load????????????????????

powered by SEO Super Comments

Related posts:

  1. When To Refill Water Softener With Salt?
  2. How Do We Dispose Of The Old Salt From The Old Water Softener?
  3. What Is The Best Water Softener Product Out There?
  4. Forgot Salt In Water Softener,now There Is Mold, What Do I Do?
  5. Water Softener- How Much Water Should Be In The Brine Tank?

  1. Comment by Wired
    October 20, 2009 @ 2:43 pm

    You don’t want to use salt in your softener if it provides water to your sprinkler system. I plumbed my sprinkler system in before the softener to avoid this problem. If it is tapped in after the softener you will probably want to use potassium chloride instead of salt in your softener. And since more water goes through your softener, you will see your salt (or potassium chloride) go down quicker.

  2. Comment by Sulli
    October 20, 2009 @ 5:40 pm

    If you are using the tap on the outside of your house then it doesn’t or shouldn’t go through your water softener so you don’t have any worries.
    Try to buy plants that are drought hardy and you won’t have to water so often. You can get some fantastic plants in that range.
    Be water wise and you may save yourself some work, money and the environment as well.
    Happy gardening

  3. Comment by starshad
    October 20, 2009 @ 6:56 pm

    Hope ou aren’t planning on watering with softened water. I can’t believe that watering with salted water would be good for your plants. If you are talking about an outside source of water that doesn’t go through the softener, it won’t effect how much salt you put in your softener.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Get Adobe Flash playerPlugin by wpburn.com wordpress themes