Home » Water Systems Q & A » What Is The Minimum Supply Line (i.d.) For A Natural Gas Water Heater And A Gas Stove?

Run 3/4 all the way to the stove, …

Comment posted What Is The Minimum Supply Line (i.d.) For A Natural Gas Water Heater And A Gas Stove? by spooky 1.

run 3/4 all the way to the stove, but you can branch off to the water heater with 1/2 .
thanks for not calling it a “hot” water heater.
good luck

spooky 1 also commented

  • I always thought around my area it was NOT 3/4 inch but 5/8
  • 3/4″
  • 1/2″ for each

Recent comments by spooky 1

  • Water Heater Issues……..can U Help?
    My first question is, what type heater do you have, gas or electric? Is this the first time you have ever drained the tank? What type of pipes are in your house? Do you have a filter upstream of the heater? Calcium is a byproduct of heating water. The minerals in water settle at the bottom, and should be drained out about 4 times a year. Whether you have gas, electric, tank or tankless, calcium is still a problem. If you are considering a switch from a tank type heater, to a tankless unit, make sure you read, and UNDERSTAND ALL THE MANUFACTURERS RECOMENDATIONS, because if you don’t comply with their instructions, you can possibly do some serious damage to the heater, and your house. The gas models especially need to be installed exactly as the manufacturer says, or damage to the unit, or even a fire can be caused, due to the increased amount of gas required, and the flue pipe needing to be replaced. It isn’t just a simple swap out, as some people think. I have removed more units than I have installed, because after researching the problem, all the units I removed, had been installed, without regard for the manufacturers recommendations. Most of the time it is an undersized gasline, but sometimes the flue pipe was not changed out, and after pricing the suggested flue pipe, the customers went back to a tank model. If you are thinking of this option, call a professional, and make sure he has done this type of installation, before letting him or her do the job. Good luck to you!
  • Water Heater Issues……..can U Help?
    If it’s clogged with sediment then maybe most of your tank is and it’s just eating the electricity to keep the sediment hot get a new water heater
  • Water Heater Issues……..can U Help?
    Based on the description of the problem and if the unit itself is older I would consider a replacement. If you look at all the sludge in the bottom that is accumulated you must keep in mind that stuff is coming out in your water when you shower, wash bathe etc. Also they are find now that in tank models bacteria such as Legionaires Disease and others can thrive in a dirty tank that sits for long periods. Not Good!
    I have a tankless water heater in my home and it is the best thing ever. It provides endless hot water so you can shower all day if you want and it never runs out. My electric bill went down about 35 dollars a month also as it only turns on when you activate hot water. A tank model turns off and on all day even if you don’t use it. The water is also safer as I indicated as it is not stored and heats as you need it.
    I did a lot of research and the largest selling unit and one that I use is the Titan Tankless N-120 Water Heater. They invented it and have been in business 20 years.
    All of the information on the unit and helpful things to help you decide are on their site at http://www.titantankless.com
    Please be careful about gas models as they are DANGEROUS!
    I would stick with electric.
  • Water Heater Issues……..can U Help?
    Replace the hot water heater, it’s done. There’s 3 to 4 inches
    built up on the burner plate, if you did clean it off the steel has been sacrificed.
    So how’s your harvick 29 car doing, yea mark martin is washed, NOT.
  • Replacing Element In Electric Water Heater.?
    BUT is the wire feeding the htr lg enuf to handle the larger load????????????????????

powered by SEO Super Comments

Related posts:

  1. What Is The Average Cost To Plumb Gas From The Water Heater To The Stove?
  2. Why Is The Supply Line To My Hot Water Heater Hot?
  3. How Much Will It Cost Me Per Month To Have A Water Heater And Stove Powered My Natural Gas?
  4. Could I Hook Up A Propane Gas Cylinderfor A Grill Or Rv To My Natural Gas Water Heater?
  5. What Size Of Megalife Water Heater Would We Need To Supply 2 Showers And One Bath In A 3 Bed Bungalow?

  1. Comment by spooky 1
    November 19, 2009 @ 5:29 pm

    run 3/4 all the way to the stove, but you can branch off to the water heater with 1/2 .
    thanks for not calling it a “hot” water heater.
    good luck

  2. Comment by Sonny Boy
    November 19, 2009 @ 8:42 pm

    1/2″ for each

  3. Comment by elevator daddy
    November 20, 2009 @ 3:08 am

    3/4″

  4. Comment by Lord Darkgoth Nitesabre
    November 20, 2009 @ 4:31 am

    I always thought around my area it was NOT 3/4 inch but 5/8

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Get Adobe Flash playerPlugin by wpburn.com wordpress themes